Close

RFP OTS MAPS Stage 2

Download Info : RFP OTS MAPS Stage 2

zip(1)





RFP OTS MAPS Stage 2


  • Author DeanerBeamer
  • Uploaded 11-07-2018, 08:01 AM
  • Total Files






STAGE 2 RFP OTS Maps are out! Strap in for this one as they are made with RFP Love. Eta on Stage 3 maps(meant for inlets) is 1-2 weeks.
Download maps for free below

Mods Needed: Charge Pipe, Downpipes, FMIC, DCI
*If your pump is crashing on E40-50 map, get walbro 450 upgrade known as Stage 2.

Donations: Paypal - rfptunin@gmail.com (no 'g')
My Group: https://www.facebook.com/groups/N54Support/

Stage 2: V9 update
*Boost control reworked slightly between 3200 - 4700 rpm
*Map will gain more low end TQ
*Fuel adjusted for more HP and TQ top end as well
*VANOS adjusted to create even more TQ High-Mid to Top range
*Added Boost X Gear X RPM for 1st and 2nd gear (Drag Racing Purposes)
  • Sticky's Avatar
    Sticky -
    Your file RFP OTS Stage 2.zip has been approved
  • 135iTX's Avatar
    135iTX -
    anyone running these?
  • Weehe's Avatar
    Weehe -
    Quote Originally Posted by 135iTX View Post
    anyone running these?
    Just people that hate their engines.
  • 135iTX's Avatar
    135iTX -
    curious what kind of boost and timing these are targeting
  • langsbr's Avatar
    langsbr -
    They're not locked so you could easily open them to see.
  • Dean@RFP's Avatar
    Dean@RFP -
    Stage 2 91 is 16-17 psi about 6* of advance 11.4 afr
    93 about 17-17.5 psi and 7.5 of advance 11.7 afr
    E40 is 18-18.5 psi and 12.5 - 13* of advance 12.446 target
    If going of lambda 12.446 is perfect. Could lean it out to 12.6-12.7 to make more tq and power but that is on you. I have videos on YouTube you can check out how to do it
  • Sticky's Avatar
    Sticky -
    Quote Originally Posted by langsbr View Post
    They're not locked so you could easily open them to see.
    I don't understand why the critics don't simply do that.
  • langsbr's Avatar
    langsbr -
    Quote Originally Posted by DeanerBeamer View Post
    Stage 2 91 is 16-17 psi about 6* of advance 11.4 afr
    93 about 17-17.5 psi and 7.5 of advance 11.7 afr
    E40 is 18-18.5 psi and 12.5 - 13* of advance 12.446 target
    If going of lambda 12.446 is perfect. Could lean it out to 12.6-12.7 to make more tq and power but that is on you. I have videos on YouTube you can check out how to do it
    None of these are setup for N20 TMAP are they? I'm not a "tunah" so I wanted to make sure I was looking at the right place. The Stage 3 doesn't have the custom MAP conversion values, if that's the right place to check, plus they are targeting 195 load. For that to be 20psi, I figured the TMap couldn't be scaled, or it would be in the 17x or 18x range.
  • marconi118's Avatar
    marconi118 -
    post some links to your youtube wideos please
  • Dean@RFP's Avatar
    Dean@RFP -
    Its scaled to 1.5 Bar vs 1.28 stock scaling. Doesn't need n20 as the mathematics behind it 14.6*1.28=18.68 psi usable but the tmap goes to 1.5 so 1.5*14.6=21.9 psi usable (I think max range is like 22.26 if I am correct)
    N20 works with 1.28 scaling and n20 in MHD sub folder below to break down load for higher boost aka above 22
  • Page 1 of 4 123 ... LastLast